Table of Contents
Advertisement
ENGLISH (Original instructions)
SPECIFICATIONS
Effective cutting width
Stroke per minute (min
Dimensions (L x W x H)
Battery cartridge
(Optional accessory) Blade length of optional hedge shear blades
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
Keep bystanders away.
Cutting means continues to run after the
motor is switched off.
Do not expose to moisture.
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In
observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for cutting lawn edges or sprouts.
Model
-1
)
Net weight
Rated voltage
Battery charger
of
the
and
returned
341 mm x 176 mm x 130 mm
BL1411G / BL1413G
D.C. 14.4 V
END010-4
Noise
The typical A-weighted noise level determined according
to IEC60335:
Sound pressure level (L
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to IEC60335:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
European
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
to
an
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENE015-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
UM165D
160 mm
1,250
343 mm x 176 mm x 130 mm
1.4 kg
DC18WA
200 mm
pA
Wear ear protection
) : 2.5 m/s
h
2
UM167D
BL1811G / BL1813G
1.4 kg
D.C. 18 V
ENG905-1
) : 78 dB(A)
ENG900-1
2
or less
ENG901-1
Advertisement
Table of Contents
