GE AEM24 Series Owner's Manual And Installation Instructions page 10

Installation Instructions
FB]PREPARE THE AIR CONDITIONER
(continues)
r_ Remove the shipping screws located on the top
of the case.
i
r_ Remove the ground screws from each side of
the case. Keep them in a safe location.
NOTE: Be sure to save these screws. You will
need them later in the installation.
[]
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not pull or
lift on the styrofoam discharge area.
Do not
pull or
lift inthis
damage
to the
unit may
result
FRONT
r_ Your unit may come with internal packaging.
This packaging must be removed prior to
installing the air conditioner back into the
cabinet.
F41PREPARE THE CASE
[] Attach the top rail gasket to the bottom of
the top rail.
r_ Install the top mounting rail with 4 type A
screws from the inside of the case. Press firmly
to drive the screws into the gasket and through
the top mounting rail.
Top mounting rail
r_ Slide each side retainer onto the edge of
each according panel. The figure shows the
orientation of each accordion panel and side
retainer assembly relative to the case from a
top view of the unit.
J
J
WINDOW FILLER PANEL
r_ Slide the left and right accordion panels into
the top and bottom mounting rails.
Bottom mounting roir
10