Table of Contents
Advertisement
Operating
Your Washer, continued
Select
the
appropriate
cycle
and
settings
for
the
load.
Turn the cycle selector
knob in either
direction
to
select the cycle desired.
The estimated
cycle
time, suitable
wash
and rinse
water
temperatures,
final spin speed, soil level,
and options
for each cycle
will be indicated
for the
cycle selected.
See the "Washer
Settings
Chart"
for
more details.
• To change
the settings,
press the temp,
spin
speed
and soil level
buttons
to scroll to the
desired
settings.
• To select
or delete
an option,
press options;
then,
while the indicator
is blinking,
press select,
The
indicator
will light when the option
has been se-
lected.
It witt no longer
be lighted
when
the option
has been deleted.
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a
setting or option is not available for the cycle selected,
the indicator will not light.
* Adjustments to a cycle will be remembered and re-
called each time that cycle is selected in the future.
'.i
_
To return to factory
_
settings, press these
_
two buttons at the
o
same time and
_/}
(}
hold until the signal
'_':.
"':
1,
sounds.
Start the washer.
* Close the door and press START. The washer will
not operate with the door open. "PRU" wilt be
displayed as a reminder to close the door.
Select delay start to delay the beginning of the
cycle, if desired.
As a safety measure, the door will automatically
lock during the entire wash cycle and the Door
Lock indicator wilt be lighted.
"Touch Pause to Add a Garment"
To add a forgotten item to the wash drum, press
Pause and open the door. "PFIU" will be displayed
alternately with the estimated remaining cycle time.
Add the item, close the door and press START to
resume the cycle.
* If changes to the settings or options are attempted
after the cycle starts, you wilt hear several beeps
when the buttons are pressed. To change the
settings or options, press pause, make the new
selections and press START again.
To change the cycle once the cycle has begun,
press cancel, select a new cycle, and press Start
again. Just turning the cycle selector knob will not
change the cycle.
, To stop the cycle, press cancel.
A signal witt sound at the end of the cycle if the
chime option has been selected.
Remove items from the washer when the cycle
ends and place in dryer, tine dry or dry fiat as
directed on the fabric care label.
/_For
best
results
Follow the fabric care label instructions
on items to be dried.
Excess wrinkling, color transfer or odors may
develop in items left in the washer after the cycle
has ended, if not removed promptly.
Do not leave the door open if there are small children
or pets present. An open door could entice children to
hang on the door or crawl inside the washer. If there
are no small children present, you may leave the door
ajar to prevent odor bu!!d up: ...........................................................
Hide quick links:
Advertisement
Table of Contents
