Download Table of Contents Print this page

Specifications; General Safety Rules; Work Area; Personal Safety - Makita 5007MG Instruction Manual

Makita circular saw instruction manual
Hide thumbs Also See for 5007MG:

Advertisement

Available languages
Table of Contents
ENGLISH

SPECIFICATIONS

Max. Cutting depth
No load speed (RPM)
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

(For All Tools)
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or seri-
ous personal injury.
SAVE THESE INSTRUCTIONS

Work Area

1.
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.

Electrical Safety

4.
Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other.) This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insula-
tion
eliminates the need for the three wire
grounded power cord and grounded power supply
system.
Model
Blade diameter
at 0°
at 45°
at 56°
Overall length
Net weight
5.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and refrigera-
USA002-2
tors. There is an increased risk of electric shock if
your body is grounded.
6.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7.
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.
8.
When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.

Personal Safety

9.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inat-
tention while operating power tools may result in
serious personal injury.
10. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in mov-
ing parts.
11. Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your finger
on the switch or plugging in tools that have the
switch on invites accidents.
12. Remove adjusting keys or wrenches before turn-
ing the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
2
5007MG / 5007MGA
185 mm (7-1/4")
63.5 mm (2-1/2")
45 mm (1-3/4")
35 mm (1-3/8")
5,800/min.
317 mm (12-1/2")
4.6 kg (10.1 lbs)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5007mga

Table of Contents