Frigidaire FFTA1233Q25 Use & Care Manual page 9

Operating Instructions
(continued)
FAULT CODES:
temp/timer
auto _"
% ^ i
v
_nergy saver
N'_ only
_m_te
[] h7 ut°
reed
Io
energy sav_r
fort on_
temp/timer
v _m_te
temp/timer
energy saver
N_,only
If the display reads "HS", a sensor has If the display reads "AS", a sensor has
failed, Contact your Authorized Frigidaire failed, Contact your Authorized Frigidaire
Service Center. Service Center.
TO CHANGE TEHPERATURE DISPLAY:
_T DO THIS;
PRESS AND HOLD THE
UP/DOWN BUTTONS
OGETHER FOR 3 SECONDS t_m_]
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
If the display reads "ES", a sensor has
failed, Contact your Authorized Frigidaire
Service Center.
YOU WILL SEE:
_emp/timer
ivi
TO TURN
UNIT OFF:
temp/dmer
s_s,ng
DO THIS:
PRESS
ON/OFF BUTTON
YOU WILL SEE:
Zemp/Ume_
Note: If the unit is turned off in heat mode (if applicable) or fan only mode, it will return to the same setting when it is turned on again.
When the unit is turned off in cool or energy saver mode, it will run in energy saver mode when it is turned on again, but the setting of
temperature and fan speed will remain. When unit is shut off in the Heat Node, the fan will continue to run for a few seconds to
dissipate residual heat within the unit.
ADDITIONAL THINGS
YOU
SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. /_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of
having to roll through to select another mode.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), S5F
and 80F degrees (in heat mode).
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
@2009 Electrolux Home Products, Inc. All rights reserved.