Frigidaire FFTA1233Q25 Use & Care Manual page 6

!!iii ¸
Operating Instructions
TO CHANGE TEMPERATURE SETTING;
temp/t_mer
[] auto _
_ /o_ ° '
[]ene,gy s_ver
]l_
DO THIS:
I PRESS A TO RAISE
_]_PRESS V TO LOWER
YOU WILL SEE;
temp/t_mer
_c_o, ¸ •
V
[] e_ergy _ver _
Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will
be automatically maintained anywhere between 60 °F (t6 oC t and 90 °F (32 oC t for cooling mode. The temperature will be auto-
matically maintained anywhere between 55 °F (13 oC t and 80 °F (27 oC t for heating mode. If you want the display to read the
actual room temperature. See "To Operate on Fan Only" section on this page.
TO AD3UST FAN SPEEDS; YOU WILL SEE;
mhy t°
meJ
Zo
[] en_y _ver
DO THIS:
PRESS TO SELECT
iemp/t_mer
io n 'ed
lar_ omy
TO USE AUTO FAN FEATURE; YOU WILL SEE:
h_ uLo
m_,d
menergy _wr
DO THIS:
PRESS FAN
BUTTON
SELECT AUTO
a _uto
hf
reed
_o
mener_s_er
temp/t_mer
iAi
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't
get too warm, it will stay at the slowest speed, If the room temperature rises quickly, such as a door being opened, it will auto-
matically go to the highest speed, The fan speeds will re-adjust back to the slowest speed as the room returns to the original set
temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the
heating mode on 115V models,
TO OPERATE ON FAN ONLY; YOU WILL SEE;
temp/Umer
[] auto _
_o
los
[]energy saver
---------F-
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models.
You can choose any fan speed you prefer. (Except "Auto Fan" t.
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. Fan Only
cannot be selected when the unit is in the "Remote Sensing" mode, (on those units with that feature t,