Bissell 94Y2 Series User Manual page 15

ntenance and care
Brush removal and lar_le belt replacement (as needed)
Brushes can be removed for cleaning
or replacement as needed.
1. Follow small belt removal Instructions on
page 14 items 1-7.
2. Removebrush rolls by pulling them off
of the metal rods. Be careful not to
lose the small washer at each
end of the brush rolls.
3. Re-attach the large belt to the grooves
on the end of the new brush rolls. If
the belt is damaged, replace with a
new belt.
2,
NING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
3,
.
.
6.
Place cleaned or new brush rolls back
onto the rods. Make sure one washer is
on each end of the rollers prior to slidin_l
onto the rod. Be sure the brush is seated
completely on the rod.
Replace small belt over grooves in
back roller and metal cog.
Replace pivot arm and secure with
silver screw.
.
8.
9.
Re-attach end cap by tightening with
the (3) black screws.
Return front nozzle to front of unit, by
latching from underneath and then
securing with 3 screws.
Follow step number 8 & 9 on page 14.
If you have any questions or are having
trouble installing or replacing your
belt(s) or brushes, please call
BlSSELL Consumer Services.
6,
8,
7,
15
www. b i s se II. co m _,_®_ 800.237.7691