Mitsubishi Electric Mr.Slim PLH-P3AAH Technical & Service Manual page 51

Split-type, heat pump air conditioners
Hide thumbs Also See for Mr.Slim PLH-P3AAH:
Table of Contents

Advertisement

OPERATING PROCEDURE
9. Removing the drain pump and drain sensor
(1) Remove the panel. (See photo 6)
(2) Remove the fan guard. (See photo 1)
(3) Remove the bell mouth. (See photo 2)
(4) Remove the electrical box. (See photo 3)
(5) Remove the drain pan. (See photo 7)
(6) Remove the 3 screws of the drain pump.
(7) Cut the drain hose band, pull out the drain hose from the
drain pump.
(8) Pull out the drain pump.
(9) Remove the drain sensor and the holder.
10. Removing the heat exchanger
(1) Remove the panel. (See photo 6)
(2) Remove the fan guard. (See photo 1)
(3) Remove the bell mouth. (See photo 2)
(4) Remove the electrical box. (See photo 3)
(5) Remove the drain pan. (See photo 7)
(6) Remove the turbo fan. (See photo 4)
(7) Remove the 3 screws of the piping cover, and pull out
piping cover.
(8) Remove the 4 screws of the outer wall cover, and pull out
the outer wall cover.
(9) Remove the screw of the coil support.
(10) Remove the 2 screws of the coil.
(11) Pull out the heat exchanger.
11. Removing the heater
(1) Remove the panel. (See photo 6)
(2) Remove the electrical box. (See photo 3)
(3) Remove the bell mouth.(See photo 2)
(4) Remove the drain pan.(See photo 7)
(5) Remove the turbo fan.(See photo 4)
(6) Remove the 5 screws of the heater assembly.
(7) Remove the clamp(1 screw) securing the lead wire.
(8) Pull the heater assembly out..
PHOTOS & ILLUSTRATIONS
Photo 8
Screw
Drain hose
Photo 9
Heat exchanger
Coil
support
Photo 10
Screw
Outer wall cover
Heater
assembly
Heater scrwe
51
Drain sensor
Fixing band
Drain pump
Coil support
Coil screws
Screws of
Piping cover
piping cover
Lead wire clamp
Screw
Coil
support

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr.slim plh-p4aahMr.slim plh-p5aahMr.slim plh-p6aah

Table of Contents