Functional Description - Makita BO3700 Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Lock button
2. Switch trigger
ASSEMBLY
1
2
1. Clamper
2. Abrasive paper with pre-punched
holes
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003281
1
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
2
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive paper
For conventional type of abrasive paper with pre-
003308
punched holes (standard equipment):
Press the clamper. Insert the paper end into the clamper,
aligning the holes in the paper with those in the pad. Then
release the clamper to secure the paper. Repeat the same
process for the other end of the base, maintaining the proper
paper tension.