Safety & International Symbols; Primer Bulb - Craftsman 316.381880 Operator's Manual

,,,SAFETY & iNTERNATiONAL SYMBOLS ,,,
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's
manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING SYMBOL MEANING
_ o SAFETY ALERT SYMBOL
indicates danger, warning or Cauti0nl May be Used in
I conjunct on w th other symbo s or p ctographs,
[[_1] '_'READ OPERATOR'S MANUAL
WARNING:
Read the operator's manual(s)
and follow al! warnings and safety instruction& Failure
todo SOCan result in Ser!0us inJuiy t0 the operator
. and/or bystanders.
_ • WEAR HEAD, EYE AND HEARING PROTECTION
S ; e Y ! j _ h a g : i;
eye protection meeting current ANSI Z87.1 standards
'and ear protection when operating this unit, Wear
head protection when operating this unit; falling
objects can cause severe head injury, Use a ful! face
shield when needed.
_ • UNLEADED FUEL
_÷÷H, A!ways Use c ean;!!eSh un eade d fuel
,,,OIL
. Refer to operator s manual for the proper type 0f 0il,
,, DO NOT USE E85 FUEL IN THIS UNIT
,thas be0n proven that f0e'
containing greater than 10% ethanol wil! likely
damage this engine and void the warranty,
I ' ON/OFF STOP CONTROL
ON / START / RUN
0
, PRIMER BULB
_.]! , Push primer bulb, fu y and s owy 10 times.
I
I m ,, CHOKE CONTROL
I_i . Pul,ed Out - FULL choke position
| | . • Pushed In - RUN position
Min.50ft(15m)
D
KEEP BYSTANDERS AWAY
"
P... WARNING. ,eep a ,bystanders, espec,a,y
children and pets, at least 50 feet (15 m) from the
operating area.
, USE BOTH HANDS •
@ WARNING:
A waYs use both hands wh e
operating the unit. Never use Only one hand to
operate the unit.
,_ ' KICKBACK
W aAnRobNJt N ogd Ce°ntact e_ tTh e gcUoidtabt rt_p
_#_ " y j h b v i . "p y
_.I cause the guide bar to move suddenly upward and
_--':@. backward, which may cause serious injury.
,_, " CHAIN OIL ADJUSTMENT INDICATOR
6 '
The chain must be continously coated with oil to
function properly. Make sure to set the oil adjustment
screw to allow a sufficient amount of oil to flow
continuously onto the chain.
_= ,,,,,_ ' CHAIN BRAKE
t_,e ))/O The chain brake immediately stops the moving saw
chain in emergency situations. To manually engage
the chain brake, push the chain brake lever forward
completely. To disengage the chain brake, pull the
. chain brake lever back completely.
_c:_ ' CHAIN DIRECTION
Make sure the saw chain faces the direction shown
when installed on the guide bar. Refer to Installing the
. Guide Barand Saw Chain in the Maintenance section.
_ _ , CHAIN TENSIONING
Always keep the saw chain properly tensioned. Turn
the chain-tensioning screw clockwise to tighten the
saw chain. Turn the chain-tensioning screw
counterclockwise to loosen the saw chain.