Maytag MTUC7500ADH0 Use & Care Manual page 9

6. Attach a 15" x 1/2"quarter-round filler along the top of the
drawer front using glue or screws.
7. Reinstall the toe guard using the existing screws and 1/2"
washer. Then, reinstall the foot pedal.
C
c<
COMPACTOR USE
H_ __8 _ °_ '_ _'_ _'_ _/,_ IS s8_,8 _JS_HS
The compacting ram is the part of the compactor which
compresses the trash. The compacting ram does not go to the
bottom of the drawer. You will not see compacting of trash the
first few times you load the compactor.
NOTE: The compactor drawer should be more than 1/2full before
the compactor can begin to compress the load.
You may hear a noise when glass breaks. Strong glass bottles
may not break at all. The trash in a full compactor bag will be
about ¼ the size of its original bulk.
A. Custom panel
B. 15" x ½ "quarter-round
C. Panel screw locations
D. Toe guard
E. Washer
F. Toe guard screw
:tIL.
I I
Load bulky trash, bottles, and cans in the center of the drawer.
Bottles or cans not placed in the center may become caught
between the ram and the drawer. The Drawer Monitor Switch
then senses a "misload" and causes the ram to return to the "up"
position without compacting.