Functional Description; Speed Change - Makita 9207SPB Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Switch trigger
2. Lock button
ASSEMBLY
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003433
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
1
• Switch can be locked in "ON" position for ease of
2
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.

Speed change

003437
For sanding operations, use the high-speed setting "H" for
maximum performance.
For polishing and buffing operations, use the low-speed set-
ting "L" for suitable speed range.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.