Lorex LH110 series Faq page 4

3 Under Channel, select the channel you wish to configure.
4 Beside the Record Mode drop-down menu, select Schedule.
NOTE: If you select Continuous, the DVR will record all video from this channel on a 24/7 basis.
5 Click the Schedule button. The Record Schedule Setup window opens.
Select recording type: Alarm, Continuous or No Record
6 Click in the box next to Alarm.
7 Click on every hour in the SUN
(Sunday) row. The row turns red
to show that the DVR will only
record events on Sundays.
NOTE: You can also configure a
custom schedule. For
example, you might want
to create a schedule to
record all data during
business hours and
record events only
outside of business
hours.
8 Set the Copy drop-down to SUN. and the To drop-down to All.
9 Click Copy; then click Ok. The entire schedule turns red to show that the DVR will only record
when there is an event.
10 Click Apply to save your changes. Then, click Exit to return to the Record menu.
To copy a recording schedule to all channels:
1 From the Record menu, under Channel, select the channel with the schedule you wish to
copy.
2 Under Copy To, select All.
3 Click Copy; then click Ok.
4 Click Apply to save your changes. Click Exit to return to the Main Menu.

Copyright 2013 Lorex Technology Inc.
Schedule shows recording
type for each hour:
• Alarm (Red): 
Record alarms only
• Continuous (Green):
Record all video data
• No Record (Blank): 
Do not record
4