Advertisement
INSTALLATIONINSTRUCTIONS
t'O0_S 3_J
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools
listed here.
•
Measuring tape
•
Drill
•
Pencil
•
7/64" drill bit
•
Phillips screwdriver
•
Tape
Parts Supplied
Duct base
Trimkit frame
Left duct
Templates 1 and 2
Bottom bracket
Top bracket
13/16" screws (2)
9/16" screws (16)
1/2" screws (4 - painted)
The microwave oven may be installed over a built-in oven. If
installing over a built-in oven, make sure there is a minimum of 3"
(7.6 cm) between the top of the lower oven cutout and the
microwave oven cutout floor.
The microwave oven may also be installed in a cabinet by itself
(without a built-in oven below). For best usability, we recommend a
minimum distance of 36" (91.4 cm) from the floor to the cutout floor.
Make sure the surrounding cabinetry has clearance to open and
close freely. Allow a clearance of at least 1" (2.5 cm) below the
cutout floor (3" [7.6 cm] for installation above a built-in oven), and
a clearance of at least 2" (5.1 cm) above the cutout opening.
1"
(2.5cm) f
I
36"
(91.4 c
t
3"
-(7.6 crn)
A. Upper cabinet
D. Lower cabinets
B. Microwave oven cutout
E. Floor
C. Lower oven cutout
(42.9
3"
(7.6
11/16Jt
(1.8 cm)
B
A. Trim kit frame overhang
B. Cutout for lower oven
NOTES:
•
Height, width and depth measurements
have _+1/16" (2 mm)
tolerance.
•
3" (7.6 cm) minimum dimension is from lower oven cutout
ceiling to microwave oven cutout floor.
•
Trim kit frame extends 11/16" (1.8 cm) below, and 19/16 ' '
(4.0 cm) above the cutout opening.
_
,_
_,
i _
_
_
_
,
_
_,,_,_
_
,-_
t
19_/8,,
(48.6 crn)
!
26_,,
24"
(61.0
c_)
17/W ' (3.7 crn)*
27/8" (7.3 crn)**
(2.2 crn)
3" (7.6 crn)
*27" (68.6 cm) trim kit
**30" (76.2 cm) trim kit
2
Advertisement
