Operation With Control Module Dsm 400 - Miele DA 6290 W Operating And Installation Instructions

Operation with Control module DSM 400

The Miele DSM 400 can be used to
combine the rangehood with other
components.
It enables the following:
Potential free connection
This is used for controlling another
appliance with the help of the
rangehood's On/Off button s.
The potential free contact of the
DSM 400 a can be installed in an
...EXT model, for instance, which is
connected to a central extraction
system.
The contact can be used to activate a
motorised shut-off flap b which is
installed before the central extraction
system c.
36
The components of the central
extraction system are not supplied as
standard by Miele.
If in any doubt, the advice of a
competent builder must be sought.
Connection to a light switch
The control module can be used to
switch on the cooktop lighting on the
rangehood and also to dim it,
depending on model, via a light switch
in the house.
The glass edge feature lighting cannot
be switched on and off in this way.
Installation
The tower needs to be removed before
the control module can be fitted to the
fan unit.
All electrical work must be carried
out by a competent, qualified
electrician.