ABLE ONTENT OVERVIEW IMPORTANT USE AND SAFETY INSTRUCTIONS DISPOSAL OF USED DEVICES PRODUT DESCRIPTION Delivery scope Specifications INSTALLATION Remove the Transit Bolts Location Water Connection Power Connection STARTUP / OPERATION Prior to First Use Control Panel Table of Washing Cycles Start up the Washing Machine End of Washing TIPS FOR SAVING ENERGY...
Page 3
Fire Danger / Short Circuit or Electric Leakage may occur Do not install the appliance close to fire sources or heat sources. Do not rest any burning candles or cigarettes on the appliance. Do not install the appliances in places with high dampness or extreme wetness, lest igniting dam- ages or other accident occur easily due to gathered water drops on electrical components.
ISPOSAL EVICES This product is marked in accordance with the European waste regulation 2002 / 96 / EC - WEEE It regulates the proper disposal of the product. Environmentally friendly disposal will pre- vent possible negative consequences to health caused by improper disposal. This symbol on the product or its packaging indicates that this product must not be dis- posed of with the regular household waste.
Delivery Scope User manual (D+GB) 4 Transit bolts caps Water inlet hose Hose holder Specifications Model WA 5612 Spin speed stop -400 -600 -800 –1.000 –max 1.200 rpm Capacity 6 kg Energy Efficiency Class – Washing Efficiency Class – A+ – A – B...
NSTALLATION Remove the Transit Bolts Before using this washing machine, transport bolts must be removed from the backside of this ma- chine. Loosen all bolts with spanner and then remove them and keep the transport bolts properly for future use/transport. Plug the holes with the transit bolts caps supplied. WARNING: Should the bolts aren’t removed, there could be serious damages during operation.
It can drain the water up and down, the drain hose shall be installed at a height of min. 60 cm and max. 90 cm about the ground and its end shall not be immersed in water. Please use the supplied hose holder for flexible hoses to get a proper angle and secure it well to avoid a change in position.
If power cord is damaged or has any sign of being broken, special power cord must be selected or purchased from its manufacturer or service for replacement. Protect the mains cable. Ensure that it does not turn into a trip hazard. The wall outlet must be freely accessible at all times.
Detergent Drawer Pull the drawer out. Full fill the main wash detergent (we recommend concentrated detergent with less or no bubble formation) in the dispenser 1 market with Add the fabric softener into the compartment 2 market with Do not exceed the maximum level mark. Full fill the detergent into the pre-wash dispenser 3 market with Close the drawer.
Page 10
4. Functions By pressing this button repeatedly you choose three basic and two combined functions. 'ECO', 'Anti-Crease', 'Rinse+', 'ECO + Anti-Crease' and ‘Anti-Crease + Rinse+’ This function is to reduce energy and water consumption when washing a smaller load. The function is not available on all programs (see ‘Table of Washing Programs’).
Table of Washing Cycles Below listed values are approximate values with standard conditions and therefore not binding. Available Functions Program Temperature ° C Time (min) Spin speed (rpm) Anti- Rinse+ creasing Standard cotton Cold/30/40/60/95 69/80/179/189/121 0/400/600/800/1000/1200 Cotton Inten- Cold/30/40/60/95 99/110/209/219/151 0/400/600/800/1000/1200 sive Cotton Cold/30/40/60/95...
The proper washing procedures shall be selected according to the types, quantities and dirtiness of the clothes to be washed in combination with the following washing temperature table. Seriously besmirched, pure white cotton or flax (for example: coffee, table cloths, canteen table 90°...
Page 13
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to strike the cabinet. Please note: formic acid and its diluted solvents or equivalent are forbidden.
- Contact a specialist. - The sensor is defective. (Error Code E7) - The circuit board is defective. Are you interested in other Bomann products? Please visit our website: www.bomann.de Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen 06/2012...
Page 15
Инструкция загружена с сайта http://mcgrp.ru большой выбор руководств и инструкций в формате pdf, doc, exe и с возможностью онлайн просмотра.
Need help?
Do you have a question about the WA 5612 and is the answer not in the manual?
Questions and answers