Control Panel; Standalone Mode; Master/Slave Mode - Luxibel LX140 User Manual

7.1

Control Panel

Access the control panel functions using the four panel buttons located around the display. From left to
right:
Button Function

MENU


UP


DOWN


ENTER

Menu
menu
4-CH
6-CH
10CH
C--
P--
S--
U--
dIM
teMP
PASS
7.2 Stand-Alone Mode
The device starts running in stand-alone mode after connection to the mains. This mode allows you to
use the device without controller.
1. Connect the device to the mains to switch it on.
2. Press MENU to enter the menu.
3. Navigate to <C--> or <P--> with UP or DOWN and press ENTER to confirm.
4. Select an option with UP or DOWN and press ENTER to confirm.
7.3

Master/Slave Mode

Notes

The master/slave mode allows for connecting several devices to a single master device in a daisy
chain.

All slave devices will then work synchronously with the master device.

Configure all slave units before connecting the master unit to the daisy chain.

The maximum number of slave units you can connect to a master unit is 18.
V. 02 – 16/12/2014
access the menu
return to a previous menu option
scroll through the menu options in ascending order
increase value
scroll through the menu options in descending order
decrease value
select menu option
store the current menu or option within the menu
function
DMX channel mode
static colour
auto programme
speed setting
colour setting mode
dimmer mode
fixture temperature
password
LX140
selection of the DMX channel mode
static colour selection
(1:R, 2:G, 3:B, 4:W, 5: GB, 6:RB,
7:RG, 8:RGB, 9:RW, 10:GW, 11:BW,
12:RGW, 13:RBW, 14:GBW, 15:RGBW)
selection of the auto programme with
LED and motor speed setting
(P1: 15-colour fading lo-hi-lo
P2: 15-colour lo-hi
P3:15-colour hi-lo
P4:mixed colour switching
P5:running P1-P4)
from slow to fast
dimmer speed selection from fast
(0.8 s) to middle (1.6 s) to slow (2.4 s)
to unlock, press UP-DOWN-UP-DOWN-
ENTER
6
description
©Velleman nv