Functional Description - Makita HPR2410 Instructional Manual

FUNCTIONAL
DESCRIPTION
1. Switch trigger
A
B
1
1. Reversing switch lever
2. Switch trigger
1. Action mode changing knob
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003107
CAUTION:
1
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Reversing switch action
003115
This tool has a reversing switch to change the direction of
2
rotation. Move the reversing switch lever to the
(A side) for clockwise rotation or the
counterclockwise rotation.
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
Selecting the action mode
003124
This tool employs an action mode changing knob. Select one
of the two modes suitable for your work needs by using this
knob.
For rotation only, turn the knob so that the arrow on the knob
points toward the
1
For rotation with hammering, turn the knob so that the arrow
on the knob points toward the
CAUTION:
• Always set the knob fully to your desired mode mark. If
you operate the tool with the knob positioned halfway
between the mode marks, the tool may be damaged.
mark on the tool body.
mark on the tool body.
position
position (B side) for