System Conversion With The Worldwide Vcr - Samsung SV-7000W Owner's Instructions Manual

00408A SV-7000W-GB1 9/7/99 1:43 AM

System Conversion with the Worldwide VCR

GB
System conversion is the most complex digital process undertaken by the Worldwide VCR, converting
the "input" into a different "output", eg from NTSC to PAL, or from PAL to SECAM.
"input"
select panel
INPUT SELECTION
VCR automatically selects the
correct TV broadcast system of
A. When RECORDING
The 'input' is the extemal TV
signal or the output from a
second VCR or LDP
B. During PLAYBACK
The 'input' comes from the
tape loaded for playback
ANY
TAPE
ANY
TAPE
8
Page 8
NORMAL(VHS) SQPB ONLY
LINE 1 IN
VIDEO L AUDIO R
REC
INPUT
NTSC
(3.58)
NTSC 4.43
PAL
PAL-M
PAL-N
SECAM
I
the input signal:
tape - on which the recording is
A. TV RECORDING
NTSC PAL PAL-M SECAM
B. PLAYBACK
NTSC PAL PAL-M SECAM
POWER
TRACKING
RESET
PAUSE/STILL
PLAY
REW F.F
STOP
PLAY
REW F.F
STOP
II
OUTPUT SELECTION
The broadcast system of the
to be made - is to be selected
on the VCR 'output' panel
The broadcast system of the
TV - on which playback is to
be viewed - is to be selected
on the VCR 'output' panel
MESECAM
Output:
Input signal converted to the
system of the tape loaded
Input
MESECAM
EJECT
SPEED AUDIO OUT
CHANNEL
"output"
select panel
OUTPUT
NTSC
(3.58)
NTSC 4.43
PAL
PAL-M
PAL-N
SECAM
MESECAM
(TAPE ONLY)
III
SYSTEM CONVERSION
VCR digitally converts scanning
lines, frequency fields and color
signal into the desired system as
selected in step ll.
Recording in the desired
TV system
Playback can be viewed
on any monitor
LINE IN
Input signal to be
recorded
Output
ANY TV