Pager Status - Multitone RPR 950 series User Manual

The available options are: -
On - normal audible alert, no vibrate;
On + vibrate - as for On, with vibrate enabled;
Mute + vibrate - alert tones and speech muted, with vibrate
enabled.

11. PAGER STATUS

Your pager is equipped to provide status information on-
demand. To activate this feature, whilst the pager is in
quiescent mode, press the OCR button once. This will cause
the message status > to be displayed, automatically followed
by each programmable status message, as follows: -
Status Message
1 New message
2 New messages
*Out-of-range
*Low battery
*Time of Day
*Mute
*Vibrate
On
*Note: Your pager has to be programmed for this option, in
order to display this message.
9261 – 9558 Issue 1
Message(s) with new status exist.
Your pager has not received
a valid system signal for 3.5
minutes min.
Battery voltage is low.
Dependent upon your pager
options, see Section 12.
Pager in Mute mode.
Vibrate option selected.
No other messages to
display.
RPR 950 Series
Condition
14