X-2004 DVB-T SD MPEG 4 Receiver USER MANUAL Please read this user manual before using or connecting this product. And keep it handy for future reference.
Safety Instructions Dear customer, Thank you for purchasing this DVB Terrestrial Receiver. Please read this manual carefully before operating your product and pay close attention to the precautions which are mentioned below. This product only can be operated where the mains supply is ~165-264V, 50Hz. ...
Precautions Peruse the following precautions before using. Do not insert fingers or other objects into the Power Cord Protection product It may damage the product or even hurt Please complaint the following regulations to avoid malfunction, fire and electric shock or other human body by touching any internal parts of damage to human body.
Accessories After unpacking, Please find out the following accessories: Remote control one piece User Manual one piece Batteries (AAA) two pieces Front Panels 1. Signal Indicator 2. Power/ Standby Indicator The LED indicator goes red in standby mode, goes green in working mode. 3.
About Remote Control Remote control Name Descriptions Switch your device from STANDBY standby mode. Select channel or programming Numeric parameters. Press numeric button Buttons 0 to switch to sleep mode. Switch between TV and Radio TV/R mode. MENU Enter in setup interface. Navigation Skip to previous channel.
Start Operation range of remote control Point the remote control to the IR receiver window. The remote control shall be effective within a distance of about 5 meters and an angle of about 60 degrees as shown in Figure C. Battery installation ...
Start Basic Connections Preparation All equipments must be connected according to this user manual. Switch off this product and other equipments before connecting Read the User Manual carefully before connecting other equipments Plug the Audio and Video cable correctly ...
Start Fast Installation Connect this unit and other apparatus according to Chapter “BASIC CONNECTIONS”. Plug the power cord, press [STANDBY] button and wait “Welcome” window appears: Use [CH▲/▼] button to select item and [VOL◄/►] button to change items. The default OSD Language is “English”, Region is “France”, Display Mode is “PAL”...
Advanced Operation Menu Operation Main Menu Press [MENU] button to browse the Main Menu including 6 submenus which are listed below: ◆ Edit Channel ◆ Installation ◆ System Setup ◆ Tools ◆ Game ◆ REC Use [ button to select item, press [OK] button to enter in its setup interface. Press [EXIT] button ▲/▼] to quit current menu.
Advanced Operation 1.3 Delete All Delete all TV and radio programs according to the screen. 2. Installation Move cursor to “Installation” and press [OK] button to enter in its submenu. There are 4 options which are listed below. Auto Scan ...
Advanced Operation 2.3 Aerial Adjustment A 5V (30mA) antenna is needed in “Tuner power on” mode. Tuner power: On/Off 2.4 LCN The channels will be listed according to signal flow if the LCN mode is on, otherwise the channels will be listed normally.
Page 13
Advanced Operation 3.3 Local Time Setting Region: France/German/Hong- Kong/Italian/Poland/Russia/Singapore/Spain/Sweden/ Taiwan/United Kingdom/Croatia/Argentina/Australia/China/Denmark/ Finland GMT Usage: OFF/User Define/By Region. GMT Offset: GMT+12:00~GMT-11:30. Summer Time: ON/OFF Date: Enter in its setup interface, use [VOL◄/►] button to move the cursor and numeric buttons to input. Press [OK] button to confirm imputation.
Advanced Operation 3.7 Favorite Totally 8 groups for optional. Choose “1 Fav group 1” and press [OK] button to rename it. Use navigations button to input according to screen. 3.8 Other Move cursor to “Other” and press [OK] button to enter in its setup interface.
Advanced Operation 4.3 Upgrade By USB Move cursor to “Upgrade by USB” and press [OK] button to enter in its submenu. Upgrade Mode All Code: All software of this device. Main Code: Logo of this device. Radio back: Default setup of this device.
Page 16
Advanced Operation 6.1 Record Manager Move cursor to “Record Manager” and press [OK] button to enter in its setup interface. The record time, capacity and format will be displayed in the menu. Find further operation according to screen. Lock: Press [GREEN] button to lock recorded video. Password will be needed to open locked recorded video.
Page 17
The recorded program will be eased automatically once channel has been shifted. Advanced Operation Tips for record video Connect USB device with receiver. Press [REC] button to start recording program. Press [STOP] button to stop recording. ...
Appendix Maintenance ◆ Unplug the power cord before maintenance. ◆ Keep the product surface clean. Please use a piece of soft cloth to clean the outer if it’s dirty. ◆ Do not use any chemical products like Alcohol or dilution to clean the product. ◆...
Specifications are subject to change (by manufacturer) without notice. Appendix Troubleshooting Look through the following table about the possible troubles and you may find answers before request service. It may help you to resolve the problems with some easy operations according to this table.
Page 20
Address: Floor-809,West Tower, Coastal City, Hai De 3 road, Nanshan Area, Shenzhen City, Guangdong Province,China 地址: (中国)广东省深圳市南山区海德三道海岸城西座 809 室 Tel: +86 755 216 79069 Mob: +86 159 893 964 29 Email:inpax@inpax.com.cn Inpax-china@inpax.com.cn Web: www.inpax.com.cn...
Need help?
Do you have a question about the X-2004 and is the answer not in the manual?
Questions and answers