Functional Description - Makita AN923 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
• Always lock the trigger and disconnect the hose
before adjusting or checking function on the tool.
A
B
1
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with lower
air pressure and the adjuster set to a lower depth of nail
driving.
Hook
1
CAUTION:
• Always lock the trigger and disconnect the hose
from the tool.
• Never hook the tool at high location or on potentially
unstable surface.
The hook is convenient for hanging the tool temporarily.
To use the hook, simply lift up hook until it snaps into the
open position.
When not in use, always lower hook until it snaps into the
closed position.
007006
1. Adjuster
007062
1. Hook
ASSEMBLY
CAUTION:
• Always lock the trigger and disconnect the hose
before carrying out any work on the tool.
Loading nailer
Select nails suitable for your work. Insert strip of nails
into the magazine.
Pull the pusher lever to the rear to engage the pusher to
the last nail.
Unloading nailer
Pull the pusher lever to the rear. Return the pusher lever
back while keeping the pusher depressed to disengage it
from the strip of nails.
Depress the nail stopper and remove the strip of nails
from the magazine.
5
007007
007008
1. Pusher
1
007009
1. Pusher lever
1
2. Depress
3. Return
3
2