3-8.
HP5501B LASER HEAD REAR PANEL INDICATORS AND CONNECTORS
A TILDE ("~") PRECEDING A SIGNAL NAME INDICATES NEGATIVE-
TRUE LOGIC LEVELS.
3-9.
Following are descriptions of the HP5501B rear panel features shown in Figure 3-2.
2.
+15V SUPPLY
UNBALANCE
3.
-15V SUPPLY
UNBALANCE
Figure 3-2. HP5501B Rear Panel Connectors and Indicators
NOTE
RED
LED lights if the ±15V input voltages are unbalanced
LED
in the positive direction by one Volt or more. For
example:
When the positive supply measures +16 Volts (or
more positive) and the negative supply remains at -
15 Volts.
When the positive supply measures +15 Volts and
the negative supply is -14 Volts (or less negative).
RED
LED lights if the ±15V input voltages are unbalanced
LED
in the negative direction by one Volt or more. For
example:
When the negative supply measures -16 Volts (or
more negative) and the positive supply remains at
+15 Volts.
When the negative supply measures -15 Volts and
the positive supply is +14 Volts (or less positive).
Both ±15V SUPPLY UNBALANCE LED's light if the
TEST-NORM switch (A1S2) is in NORM position with
cover off or in TEST with cover on.
HP5501B
Operation
3-11