4 PERFORMANCE TESTS
4-1.
Introduction
4-2.
This section contains a performance test for the HP5501B Laser Head. A test record is
included to record test results for future comparison.
4-3.
RECOMMENDED TEST EQUIPMENT
4-4.
Test equipment requirements are included in the following procedure. Detailed critical
specifications for the required test equipment are contained in Table 1-2, Recommended
Test Equipment. Any equipment that satisfies the critical specifications given in the table
may be substituted for the recommended model(s).
4-5.
TEST RECORD
4-6.
Results of the performance test may be tabulated on the test record at the end of these
procedures.
4-7.
HP5501B PERFORMANCE TEST
4-8.
The HP5501B performance test consists of measuring the HP5501B input voltages and
laser power output.
4-9.
Input Voltage Check
4-10.
Check the HP5501B voltages in the following manner:
Disconnect the POWER cable.
Measure the voltages at the disconnected cable plug as outlined in Table 4-1.
4-11. Laser Power Output Test
4-12.
Test Equipment Required. The following test equipment is required to test the laser
output power.
Laser Power Meter, United Detector Technology (Model No. 351L)
Table 4-1. Input Voltage
Plug Pin
Voltage
A1J5 (A)
+15 ±0.3 Vdc
A1J5 (B)
-15 ±0.3 Vdc
HP5501B
Performance Tests
4-1