Carrying power tools with your fi nger on the switch or GENERAL POWER TOOL SAFETY WARNINGS energising power tools that have the switch on invites accidents. WARNING d) Remove any adjusting key or wrench before Read all safety warnings and all instructions. turning the power tool on.
The dust can endanger the health of could give the operator an electric shock. yourself and bystanders. SPECIFICATIONS Model DH24PH DH26PC DH28PCY Voltage (by areas)* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
OPTIONAL ACCESSORIES (sold separately) Tool Adapters Use on jobs facing upwards ● Drilling holes in concrete or tile Dust cup Dust collector (B) Drill bit ● Drilling anchor holes Taper shank Cotter Drill bit (Taper shank) adapter ● Large hole boring Guide plate Center pin Core bit Core bit shank...
Page 16
● Drilling holes in concrete or tile ● Large hole boring Drill bit (slender shaft) Core bit Core bit shank Center pin Outer dia. Overall length Outer dia. Overall length Eff ective length 25 mm* 3.4 mm Not applicable 90 mm 45 mm 29 mm* 3.5 mm...
○ When turning the rotary hammer on while dust collector APPLICATIONS (B) is detached from a concrete surface, dust collector (B) will rotate together with the drill bit. Make sure to turn Rotation and hammering function on the switch after pressing the dust cup on the concrete ○...
(1) Attach the drill chuck to the chuck adapter. (2) Adjust the depth gauge position according to the depth of (2) The part of the SDS-plus shank is the same as the drill the hole and thighten the knob securely. bit.
ONLY be performed by a HITACHI Authorized Service Center. 5. Replacing supply cord If the supply cord of Tool is damaged, the Tool must be returned to a Hitachi Authorized Service Center for the cord to be replaced. 6. Service parts list CAUTION Repair, modifi...
Page 24
服务中心 日立工机商业 (中国) 有限公司 上海市长宁区遵义南路88号协泰中心19B-C 制造商 福建日立工机有限公司 福建省福州市福兴投资区湖塘路 Code No. C99207122 F Printed in China...