Canon EOS REBEL SL1 Instruction Manual page 21

LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there may be a few dead pixels
displaying only black or red, etc. among the remaining 0.01% or less pixels.
Dead pixels are not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slow in low temperatures, or look black
in high temperatures. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card's electronic contacts with your fingers or anything
metallic.
Do not affix any stickers, etc., on the card.
Do not store or use the card near anything having a strong magnetic field,
such as a TV set, speakers, or magnet. Also avoid such as a TV set, speakers, or magnet. Also avoid places prone to having such as a TV set, speakers, or magnet. Also avoid such as a TV set, speakers
static electricity.
Do not leave the card Do not leave the card in direct sunlight or Do not leave the card in direct sunlight or near a heat source. Do not leave the card in direct sunlight or near a heat source.
Store the card in a case. Store the card in a case. Store the card in a case. Store the card in a case. Store the card in a case. Store the card in a case. Store the card in a case. Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Lens
After detaching the lens from After detaching the lens from After detaching the lens from the camera, put down the lens
with the rear end up and attach the lens caps to avoid with the rear end up and atta with the rear end up and atta
scratching the lens surface and electrical contacts. scratching the lens surfac scratching the lens surfac
Cautions regarding Prolonged Use
If you use continuous shooting, Live View shooting, or
movie shooting for a prolonged period, the camera may
become hot. This is not a malfunction.
Smudges Adhering to the Front of the Sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera's internal parts may adhere to the front of the sensor. If visible spots still
remain after the automatic sensor cleaning, having the sensor cleaned by a
Canon Service Center is recommended.
rded data, note the following: rded data, note the following:
rs, etc., on the card. rs, etc., on the card. rs, etc., on the card. rs, etc., on the card. rs, etc., on the card. rs, etc., on the card. rs, etc., on the card.
rd near anything having a rd near anything having a rd near anything having a rd near anything having a rd near anything having a rd near anything having a rd near anything having a
, or magnet. Also avoid , or magnet. Also avoid , or magnet. Also avoid , or magnet. Also avoid , or magnet. Also avoid
in direct sunlight or in direct sunlight or in direct sunlight or in direct sunlight or in direct sunlight or
rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations. rd in hot, dusty, or humid locations.
not subject it to not subject it to excessive force, excessive force,
acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything acts with your fingers or anything
Handling Precautions
Contacts
21