Information Display - Canon EOS REBEL SL1 Instruction Manual

A Shooting with the LCD Monitor

Information Display

Each time you press the <B> button, the information display will change.
Possible shots
Shooting mode
AF method
Drive/self-timer
Metering mode
Image-recording
quality
Switch to auto
selection
(AF point)
Touch shutter
Flash-ready/Flash off Flash-ready/Flash off
Shutter speed Shutter speed Shutter speed
Flash exposure compensation Flash exposure compensation Flash exposure compensation
Exposure level indicator/AEB range Exposure level indicator/AEB range Exposure level indicator/AEB range
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is displayed at
a brightness that differs from the actual shooting result because of low-
or bright-light conditions. However, the actual image recorded will reflect
the exposure setting. Note that noise may be more noticeable than the
actual image recorded.
If you use the <F> or <G> shooting mode, use flash, or set a bulb
exposure, the <g> icon and histogram will be grayed out (for your
reference). The histogram may not be properly displayed in low- or
bright-light conditions.
152
AF point (Quick mode)
Battery check
AE lock
Aperture Aperture Aperture
Histogram display
Auto Lighting
Optimizer
Quick Control
White
balance
Picture Style
Creative filters
Eye-Fi card
transmission status
Exposure
simulation
Magnified view
AEB/FEB/ Multi Shot
Noise Reduction
ISO speed
Highlight tone priority
GPS connection indicator
Digital compass