Canon EOS REBEL SL1 Instruction Manual page 158

U Using Creative Filters
Even if you set Driv Even if you set Driv Even if you set Drive/self-timer to <i> or <q>, the camera will still shoot
in single shooting mode.
You cannot shoot with Creative filters if the recording quality is 1+73
or 1 or if AEB, white balance bracketing, or Multi Shot Noise
Reduction is set.
The histogram is not displayed when you shoot with Creative filters.
With Grainy B/W, the grainy effect displayed on the LCD monitor will look
different from the grainy effect recorded in the picture.
With the Soft focus and Miniature effects, the blurred effect displayed on
the LCD monitor will look different from the blurred effect recorded in the
picture. In Creative Zone modes, you can check the picture's blurred
effect by pressing the depth-of-field preview button.
158
5
Adjust the filter effect.
Press the <B> button (except for
Miniature effect).
Press the <Y> <Z> keys or turn the
<6> dial to adjust the filter effect,
then press <0>.
For the Miniature effect, press
<0>, then press the <W> <X>
keys to move the white frame to
where you want the image to look where you want the image to look where you want the image to look
sharp.
6
Take the picture. Take the picture. Take the picture. Take the picture. Take the picture. Take the picture.
The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter The image is shot with the filter
applied. applied. applied. applied. applied. applied. applied. applied.