Table of Contents
Advertisement
HOW TO INITIALIZE THE BLU-RAY DISC HOME THEATER
To put the program back at the factory-default,
initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. a appears on the screen. All VFD lights.
" ******* " differ depending on the models.
Version Info
F/W Name
: *******
Version
: *.***
Region
: *-*
Pickup
: **
EEPROM CLEAR <STOP>
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
" ******* " differ depending on the models.
Version Info
F/W Name
: *******
Version
: *.***
Region
: *-*
Pickup
: **
EEPROM CLEAR : OK
EEPROM CLEAR <STOP>
5. To exit this mode, press [
EXIT <POWER>
Fig. a
EXIT <POWER>
Fig. b
Fig. c
] button.
1-6-1
E1T12INT
Advertisement
Table of Contents
