Table of Contents
Advertisement
5019_719_01136_GB:Layout 1
Product description and symbols
1. Central removable pan support
2. Removable side pan support
3. Auxiliary burner
4. Semi-fast burner
5. Fast burner
6. Semi-fast burner
7. Professional triple crown WOK burner
8. Auxiliary burner control button
9. Semi-fast burner control button
10. Fast burner control button
11. Semi-fast burner control button
12. Professional triple crown WOK
burner control button
Control Symbols
Off
Maximum flame
Minimum flame
Using the burners
To turn on one of the burners:
1. Turn the corresponding control knob
anticlockwise until the indicator coincides with
the maximum flame symbol
2. Press the control knob to ignite the burner.
3. Once the burner has been lit, keep the control
knob pressed for 5 seconds, allowing the safety
thermocouple to fitted to the gas burner to
engage. The safety thermocouple switches off
the gas supply to the burner should the flame
accidentally go out (a gust of wind or spillage, or
temporary interuption of the gas supply).
15-01-2008
9:59
Pagina 4
If the burner does not ignite within about 15
seconds, switch off the burner, check the
fitting of the burner cap and plate for correct
fitting. Wait at least 1 minute before trying
again.
.
If the burner goes out when the control knob
is released, the thermocouple did not engage.
wait al least 1 minute before repeating strps 1
to 3.
4
Advertisement
Table of Contents
