Page 1
ORIGINAL INSTRUCTIONS 18V Corner Sander R18PS...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Safety Safety, performance, and dependability have been given (RCD) protected supply. Use of an RCD reduces the risk of electric shock. top priority in the design of your corner sander. PERSONAL SAFETY INTENDED USE ■ Stay alert, watch what you are doing and use The product is intended for dry sanding and polishing common sense when operating a power tool.
Safety power tool’s operation. If damaged, have the endanger the health of operator and bystanders. power tool repaired before use. Many accidents ■ Do not throw sanding dust on an open fire because are caused by poorly maintained power tools. materials in fine particle form may be explosive.
Safety ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste. The machine, accessories packaging should sorted environmental-friendly recycling. SYMBOLS Safety alert CE conformity Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements. No-load speed Please read the instructions carefully before starting the machine.
Safety PRODUCT SPECIFICATIONS BATTERY AND CHARGER 18V Corner Sander Model Compatible battery pack Compatible charger (not included) (not included) Voltage 18 V Lithium-Ion RB18L13 BCS618G No load speed 11000 min RB18L15 BCL14181H RB18L25 BCL14183H No load orbital stroke rate 22000 min RB18L26 BCL1418IV* Main sanding sheet surface...
Know your product 1. Battery port 6. On switch 2. Vacuum adaptor 7. Sandpaper 60# 3. Exhaust port door 8. Sandpaper 120# 4. Hook-and-loop pad 9. Sandpaper 240# 5. Off switch...
Need help?
Do you have a question about the R18PS and is the answer not in the manual?
Questions and answers