JVC KS-F350R Service Manual page 4

Removal of main parts
Removing the front chassis (See Fig.1)
1. Insert a screwdriver to the joints a on the side of the front
chassis and two joints b on the right side, then detach the
front chassis toward the front side.
Removing the heat sink (See
1. Remove the three screws A attaching the heat sink on
the left side of the body, and remove the heat sink.
Removing the bottom cover (See
1. Removing the front chassis.
2. Removing the heat sink.
3. Turn the body upside down.
4. Insert a screwdriver to the two joints c and two joints d on
both sides of the body and the joint d on the back of the
body, then detach the bottom cover from the body.
Removing the rear panel (See
1. Remoe the front chassis.
2. Remove the heat sink.
3. Remove the bottom cover.
[KS-F350 / KS-F353]
4. Remove the three screws B attaching the rear panel and
one screws C attaching the pine jack on the back of the
body.
B
Fig. 4
[KS-F350 / KS-F353]
Fig.2 )
Fig.3 )
Fig.4 and 5 )
C
B
B
a
Front chassis
a
A
A
c
d
[KS-FX450 / KS-FX453]
4.
Remove the Fore screws B' attaching the rear panel, one
screw C' attaching the pin jack and one screw D
attaching the C D changer input jack.
B'
Fig. 5
[KS-FX450 / KS-FX453]
b
b
Fig.1
A
Heat sink
Fig. 2
Bottom cover
c
Fig. 3
B'
CD changer input jack
C'
D
B'
B'