Vax VCW-05 User Manual page 8

Usage
Troubleshooting
! !
! !
To reduce risk of personal injury, unplug spray extractor before servicing.
PROBLEM: No water comes out of the nozzle
Cause: The cleaning product tank is empty.
Cause: The nozzle is blocked.
Cause: The suction filter in the tank is blocked.
Cause: The spraying pump does not work.
Cause: Quick connector is not working properly.
Cause: The water duct is soiled with chemical agents.
Cause: The pump is air locked.
PROBLEM: The pump is noisy
Cause: The pump is air locked.
8
Solution: Pour at least 3 litres of water into the tank
and try again.
Solution: Clean or change the nozzle.
Solution: Clean the filter.
Solution: The spray pump will need to be changed.
Call our service centre for more information.
Solution: Check and clean it.
Solution: Rinse the pump system with running water.
Solution: Clean the ducts and hoses and vent
the pump.
Solution: Clean the ducts and hoses and vent the
pump. Disconnect the quick-connector in order for
the air to get out.
vaxcommercial.co.uk