Table of Contents
Advertisement
Usage
Follow these steps to prime the spray extractor before use, for optimum performance:
• Fill the clean water tank.
• Place wash tool attachment on floor.
• Depress the solution dispense button on hose for 10 seconds while the power is off.
• Repeat if necessary.
• To increase the drying time once cleaned, repeat the cleaning action but without using the spray function
(ie, vacuum only)
Drag the nozzle over the surface
making overlapping stripes and in
a backwards direction. Use the
larger suction nozzle without the
slat for carpets.
The rest of the water can be sucked
in using a wet vacuum cleaner.
6
Use the smaller attachment in a
similar way for car interiors, wall
carpets, stairs and upholstery
After the work is done, rinse the
whole water system with 3 litres of
warm water.
vaxcommercial.co.uk
Advertisement
Table of Contents
