Regular Wheelbase Shown,
Extended Wheelbase Similar
1. Remove the tray to access the
tools by pulling up on the finger
depression under the jack
symbol.
A. Jack Knob
B. Wing Nut Retaining the
Tool Bag
C. Wing Nut Retaining the
Wheel Blocks
2. Turn the wing nut retaining the
tool bag (B) counterclockwise to
remove it.
3. Turn the jack knob (A)
counterclockwise to release the
jack and wheel blocks from the
bracket.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
4. Turn the wing nut retaining
the wheel blocks (C)
counterclockwise to remove
the wheel blocks and the
wheel block retainer.
Use the following tools:
A.
Jack
B. Wheel Blocks
C. Jack Handle
D. Jack Handle Extensions
E. Wheel Wrench
10-73