Bulb Replacement; Halogen Bulbs; Taillamps, Turn Signal; Stoplamps, And Back-Up - GMC Yukon 2012 Owner's Manual

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 39.
For any bulb changing procedure
not listed in this section, contact
your dealer.

Halogen Bulbs

WARNING
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps

If the vehicle is a Hybrid, see the
Hybrid Supplement for the bulb
changing procedure.
A. Stoplamp/Taillamp
B. Taillamp/Turn Signal Lamp
C. Back-up Lamp
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
(Manual) on page 2 9 or Liftgate
(Power) on page 2 10.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly
rearward until you disengage the
inner pins on the taillamp
assembly from the vehicle.
10-37