UNITED USF-622 Instruction Manual

16” stand fan

Download this manual

INSTRUCTIONS MANUAL

MODEL: USF-622

16" Stand Fan

Thank you for your purchasing this fan. Please read all instructions carefully and

keep for future use.

Please read these Operating Instructions through carefully before connecting your

device to the mains, in order to avoid damage due to incorrect use. Please pay

particular attention to the safety information. If you pass the device on to a third party,

these Operating Instructions must also be handed over.

Page 1 INSTRUCTIONS MANUAL MODEL: USF-622 16” Stand Fan Thank you for your purchasing this fan. Please read all instructions carefully and keep for future use. Please read these Operating Instructions through carefully before connecting your device to the mains, in order to avoid damage due to incorrect use. Please pay particular attention to the safety information.
Page 2 STRUCTURE FRONT GUARD FAN BLADES GUARD MOUNTING NUT BACK GUARD MOTOR SHAFT MOTOR HOUSING/SWING BUTTON SWITCHES SWITCH COMPARTMENT LOCK SPRAIN UPPER TUBE TUBE CONNECTOR LOWER TUBE ROUND BASE SPECIFICATIONS VOLTAGE FREQUENCY POWER 220-240V~ 50Hz ASSEMBLY 1. Secure lower tube with tube support to the hub of Round Base with screw provided. 2.
Page 3  Use the appliance only for it’s direct purpose  Never expose the appliance to fall down or to be kicked  While using the appliance, please, observe the safety precautions  Use the appliance in a well ventilated area. While in use, ensure that the air-intakes or exhaust openings are not blocked un-expectedly and the appliance distance from the wall or corner is more than 20 cm.