Safety Warnings When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the followings: To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture. Dangerous high voltages are present inside this enclosure.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE FEATURES OF THIS PRODUCT Stand fan Using: 1. Front Grille Blade Cap Blade Plastic Mounting Nut Rear Grille Motor Shaft 7. Motor Housing 8. Oscillating Knob 9. Connector 10. Switch Box 11. Set Screw 12.
PRODUCT ASSEMBLY ASSEMBLE OF BLADE AND GRILLE Unscrew the plastic mounting nut from the front of the motor housing by rotating it anticlockwise. Position the rear grille against the front of the motor housing with the handle uppermost, ensuing that the locating pegs on the motor housing are engaged correctly in the holes of the rear grille.
Care and Cleaning Always disconnect from main socket before cleaning. Avoid contact with moving fan parts. Use only a soft and damp cloth to clean the fan. DO NOT immerse the fan in water and never allow water to drip into the motor housing. ...