Page 1
16”Metal Stand Fan With Remote Control MODEL: USF-654 SAFETY PRECAUTIONS When using any electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions and keep for future reference. This appliance is not intended for use by persons (including children) with reduced physical,...
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance. Always unplug the appliance from the mains when not in use.
Fan Head Assembly There are two knobs at the Connector; the smaller one is the Tilt Knob and the bigger one is the Locking Knob. Unscrew the Locking Knob to loosen the Thread Bolt. Pull Telescopic Inner up to your desired height and lock in place by tightening the Height Adjustment Screw Place the Motor onto the Telescopic Inner.
Page 4
REMOTE CONTROL Put two batteries (TypeAAA,1.5V) into the battery compartment of the remote control and close the cover until it clicks into place. The maximum distance for transmitting signals from the remote control to the fan is 6 meters. Make sure that no objects are hindering signal transmission.