Advertisement
Quick Links
Optional Protea
Latency
A/D, D/A Converters:
DSP
Digital Input Type
Signal Flow Architecture
Available Processing Blocks
Equalization
Signal Delay
HPF/LPF
Compressor/Limiter, Gate, Meter
Signal Generator
Level Control
Ashly Audio Inc.
847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Tel (585) 872-0010, FAX (585) 872-0739
www.ashly.com
All Trademarks referred to herein, are the property of their respective owners.
DSP Input Card
ne
Analog - 1.512 ms at 48KHz sampling.
Digital - 0.784 ms at 96KHz sampling.
24-bit
32-bit, floating-point
AES/EBU 24 bit 44.1 to 96KHz
"Click and hot plug" flexible architecture, non-
compiling
Parametric, Notch, Graphic, Shelving, HPF/LPF, All
pass, Bandpass
Up to 967msec any input/output
Up to 8th order (48 dB/octave)
Pink noise, White Noise, Sine Wave
With or without DVCA subgrouping
PE-Series Amplifiers
ne
Protea
DSP Option Cards
Installation and User Guide
Copyright© 2006 – Ashly Audio Inc. All Rights Reserved
Rev 1.2 1007
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ashly Protea DSP Option Card DSP1
Summary of Contents for Ashly Protea DSP Option Card DSP1
- Page 1 Toll Free (800) 828-6308, Tel (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners. PE-Series Amplifiers Protea DSP Option Cards Installation and User Guide Copyright© 2006 – Ashly Audio Inc. All Rights Reserved Rev 1.2 1007...
- Page 2 The Protea -DSP cards are only for use in Ashly PE-Series (Protea Enabled) amplifiers. The DSP-1 and DSP-2 cards offer a wide range of digital features that extend the functionality of your PE-Series amplifier. If the Protea -DSP Option Card was ordered with your amplifier, no installation is necessary.
Need help?
Do you have a question about the Protea DSP Option Card DSP1 and is the answer not in the manual?
Questions and answers