Table of Contents
Advertisement
7.1 AF (Auto Focus) AFTER MOVE
When set to ON, this causes the lens to enact an automatic focus
adjustment each time the camera is moved to a new view or when
the zoom level changes.
When set to OFF, the camera will retain whatever focus setting it
had previous to the move or zoom level change.
7.2 PRESET LOAD ZOOM
When set to ON, recalling a preset on the camera will set the
camera to the PAN position, TILT position and ZOOM level stored
within that preset.
When set to OFF, recalling a preset on the camera will set the
camera to the PAN position and TILT position stored within that
preset, but will ignore the ZOOM level stored in the preset.
7.3 AUTO CHECK FOCUS
When set to ON, the camera will periodically check the focus
status and re-focus if needed. The period of time is set in the
AUTO CHECK TIME parameter (# 7.3 below). In order for this to
work, the focus mode must be set to AUTO (# 7.0 above).
7.4 AUTO CHECK TIME
This is the amount of time, measured in seconds, that the camera
will wait after receiving a command before it will check the focus
status. It is adjustable from 0 thru 255 seconds.
7.5 DISPLAY ZOOM TIMES
When set to ON, the camera will show the zoom multiplication in
the OSD, superimposed over the video; e.g. 1X, 4X etc up to 12X
optical zoom.
25
Advertisement
Table of Contents
