Table of Contents
Advertisement
6.13 LANGUAGE
From page 2 of the CAMERA SETUP MENU move the cursor to
LANGUAGE and use the LEFT & RIGHT buttons to select a
language for the camera's OSD. Choices include ENGLISH,
FRENCH, SPANISH, RUSSIAN, etc.
When finished, select RETURN and press OPEN to return to the
CAMERA SETUP MENU page 2.
6.14 CAMERA RESET
This function will reset all CAMERA MODULE functions back to
the factory default settings. This is useful if many parameters have
been changed and the user wishes to get a 'fresh start' for minor
adjustments.
This function only resets the camera module, which all functions in
sections 6.1 through 6.12 above. This will NOT reset an tour or
preset information. To reset the movement functions of the
camera, please see section XXXXX below.
To reset the camera module: From page 2 of the CAMERA
SETUP MENU move the cursor to CAMERA RESET. Press OPEN
to begin the reset. This will take several seconds to complete and
the OSD will display the status of the reset.
NOTE:
This function ERASES ALL SETTING MADE BY THE USER TO
THE CAMERA MODULE. All camera settings must be
manually set up again.
23
Advertisement
Table of Contents
