Related Manuals for Security Tronix ST-PTZMINI-IR10X
Summary of Contents for Security Tronix ST-PTZMINI-IR10X
- Page 1 INSTALLATION MANUAL© ST-PTZMINI-IR10X High-Speed Intelligent Dome Software-Addressable IR PTZ Color Camera...
-
Page 2: Package Contents
One installation manual. PRODUCT DESCRIPTION The ST-PTZMINI-IR10X is a professional grade infrared intelligent dome color camera with pan, tilt and zoom (PTZ) capability and 650TVL resolution. The camera’s non-volatile digital memory allows the saving of all settings in the event of power loss. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read these instructions before attempting installation or operation of dome device. 2. Keep these instructions for future reference. 3. Heed all warnings and adhere to electrical specifications. Follow all instructions. 4. Clean only with nonabrasive dry cotton cloth, lint free and approved acrylic cleaners. 5. - Page 4 Specifications Horizontal Rotation Speed 0.02°-200°/s Tilt Rotation Speed 0.02°-120°/s Horizontal Rotation Range 360° Tilt Rotation Range 93° Auto Flip Horizontal 180°, Vertical 93° Zoom-proportional Speed Support Auto control IR LED IR Testing Time 2-15s selectable Ambient Light Reporting 0-50 grades IR Illumination On 0-25 grades selectable IR Output Power...
- Page 5 Product Dimensions (in millimeters) Bracket Dimensions Included Wall Mount Bracket Optional Ceiling Mount Bracket...
- Page 6 Installation Connections Before connecting, please turn off the power of all connected devices. Use the included power supply to ensure the camera is being supplied sufficient current for proper operation.
- Page 7 Instructions Power On Action When initializing the system, the display shown at left will appear roughly 5 seconds after powering the camera. IR SPEED DOME When restoring the original factory settings it will take roughly 1 minute for the camera to restore all settings and reboot. PROTOCOL PELCO-D/P COMM...
- Page 8 Basic Function Controlling the dome’s position (PTZ) The dome responds to standard PTZ controls UP, DOWN, LEFT, RIGHT and ZOOM to position the camera toward a subject to observe. The camera supports PROPORTIONAL ZOOM which will cause the pan and tilt functions to operate at lower speeds when the camera is zoomed to the maximum setting (10X optical zoom).
- Page 9 General OSD Operation Call preset 95 to enter the OSD, call preset 94 to exit the OSD. Up or Down: Move the cursor UP and DOWN within the OSD, change the value on the OSD. Right: Enter the option, select the item or confirm. Left: Return to main menu or cancel.
- Page 10 OSD Menu...
- Page 11 System <MAIN MENU> <MAIN MENU> When preset 95 is called from a PTZ controller the main menu will appear <SYSTEM> overlaid on the video output of the camera. The main menu lists several <DOME> sub-menus which each deal with separate aspects of the camera’s <CAMERA>...
-
Page 12: Scan Speed
Dome Functions <PRESET> <PRESET> PRESET NO CALL PRESET PRESET NO: Select a preset number to be called or edited. SET PRESET CALL PRESET: This will send the ‘call preset’ command to the EXIT camera, for the preset number selected above. SET PRESET: Selecting SET PRESET will display the screen shown at left. -
Page 13: Save Pattern
<GUARD TOUR > <GUARD TOUR>: Selecting this will display the GUARD TOUR POINT TIME SPEED setup screen shown at left. Use the PTZ controller’s LEFT and RIGHT controls to navigate to preset points, times and speeds for each of the 16 “ID” slots desired. Use the PTZ controller’s UP and DOWN controls to change the value of the selected parameter. - Page 14 Dome Functions <OTHER> <OTHER> PARK MODE: After an idle period of time has elapsed which is set in PARK MODE NONE the next parameter (Park Time), the camera will perform the PARK TIME action which is selected here. The options are: NONE, Pattern 1, POWER ON ACT MEMORY Tour 1, 360 Scan, A/B Scan or Presets 1 thru 8.
- Page 15 <IR> AMBIENT LIGHT: This is not a value which can be set; it is a built-in IR MODE AUTO meter which analyzes and displays the ambient light level on a OUTPUT POWER scale of 1 thru 50. When the camera is facing a brightly lit scene TESTING TIME the values will be higher.
- Page 16 <SCHEDULE>: To schedule events, select the <SCHEDULE> menu <SCHEDULE> item and the screen shown at left will appear. Use the PTZ controller’s LEFT and RIGHT controls to move through the Hour, START Minute and Second fields (h00:m00:s00) and set the start and 00:00:00 00:00:00 NONE...
-
Page 17: Troubleshooting
TROUBLESHOOTING a. No picture after applying power – (i) check all plugs and cables are connected to the proper connectors: (ii) ensure your power supply is providing the correct voltage and enough current. b. The picture has ripples – (i) Check to see if the power supply is experiencing AC ripple. If so, a filter may be required.