Before Using The Appliance; Switching On The Appliance - Bush BUCL6082 Installation & User's Instructions

Before Using the Appliance

Recommendations

Switching on the appliance

• Before switching on, place the appliance in an
upright position and wait at least three hours
without moving the appliance. This will give
the freezing circuit time to settle and operate
effi ciently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
• Installation of the appliance and electrical
connections must be carried out by a qualifi ed
technician in accordance with the installation
manual and local regulations.
• The procedure for installation the appliance into
the kitchen unit is given in the installation section
of this manual. This product is only intended to
be used in proper kitchen units.
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
comply with the details on the name plate of
the appliance (the name plate is located on the
inside-left of the appliance).
• Insert the plug into a socket with an effi cient
ground connection. If the socket has no
ground contact or the plug does not match, we
suggest you to call an authorised electrician for
assistance.
• The manufacturer is not responsible for failure to
complete the ground connection as described in
this booklet.
• There can be an odour when you fi rst switch
on the appliance. It will disappear after the
appliance starts to cool.
• The plug must be accessible following
installation.
Customer Helpline 0845 600 4632 5