Haier HWD1000 User Manual page 18

HWD15/1600 Error Code Chart Part 2
Note This chart assumes all operation issues have already been attempted
Error Number
Inspect the water line from the drum to the pressure sensor look for
Err8 restrictions or loose connections, Inspect the electrical connections from
Verify the continuity of the dryer heater, dryer fuse and thermal cutout.
Err9
Open the dryer housing and verify there is NOT a lint buildup.
Inspect the pressure tube from the tub to the pressure sensor looking
Er 10
for kinks or leaks. Inspect the electrical connections from pressure
Inspect the wiring from the Main PCB to the drain pump, Inspect the
Err 12
Unplug the unit and plug it back in to reset the CPU. Verify the
Err 13
continuity of the dryer heater, dryer fuse and thermal cutout. Open the
UnB Rebalance the load and verify the unit is not being overloaded
Possible solution
the pressure sensor to the Main PCB
sensor to the Main PCB
drain pump for restrictions or clogs
dryer housing and verify there is NOT a lint buildup.
Parts Recommendation
Pressure Sensor
Dryer Heater
Pressure sensor
Pressure Sensor
Main PCB
N/A
18