Pfaff 2144 Instruction Manual page 92

4-24
Touch to confirm your selection, it appears in the
sewing sequence sceen.
When you open the sewing sequence screen, the most
important settings are visible and selectable.
A cursor line shows the end of the sewing sequence where
all further stitches are added.
If you wish to continue working with a stitch, move the cur-
sor line over the stitch to select it.
A selected stitch is shown surrounded by a frame in the
sewing sequence.
More options for adjusting a sewing sequence are
accessed by touching
Touch the icon again to close the selection.
If you wish to repeat the same stitch, touch
appears directly on the screen.
Touch on the sequence screen to call up each additio-
nal stitch that you wish to include in the sewing sequence.
The variant of the main menu appears again to enable you
to select each additional stitch.
• If you wish to include other stitches from the machine's
memory, proceed as described above.
• If you wish to combine stitches from the machine's me-
mory, a creative card or a creative memory card, touch
"Card / machine".
.
. It
4. Operate the multi-color touch screen
Select a stitch from a card
The following window appears when you touch
"Card / machine"
Touch the proper card drive.
The procedure for selecting a stitch/pattern from the
machine's memory or from a creative card is the same.
Selecting a stitch/design that is stored on a card:
You can only select stitches that can be included in a sew-
ing sequence. Embroidery designs, embroidery alphabets
or embroidery monograms cannot be used.
The content of the entire creative card is opened.
• Stitches appear directly on the screen.
• If the content on the card is arranged in different direc-
tories, these are shown as folders.
You can browse one column at a time with the cursor
arrows. Touch a folder to see its content.
When you open the directory where the stitches are stored,
or touches a stitch to include it in your sewing sequence, a
menu to adjust single stitches is opened.