Vision Eye Quattro User Manual page 28

19. Quattro environment setting (2)
[ Environment setting]
1. Parking mode motion sensitivity: For adjusting the sensitivity of the sensor
that detects a motion (while parked). It is possible to choose among the
four levels: high, medium, low, and no use.
2. Shock detection sensitivity: For adjusting the sensitivity of the sensor that
detects shock. The higher the value becomes, the lower the sensitivity gets,
and vice versa (Select: Stages 1-10)
3. Auto cutoff voltage setting: For setting the cutoff voltage and the cutoff time.
The cutoff will take place when one of the two conditions is met. There are
four stages of the cutoff reference voltage that can be selected, 11.5 V, 11.7 V,
11.9 V, and 12.1 V.
There are five stages of the cutoff time can be selected from: None, 6, 12, 24,
and 48 hours. It is just required to set one of the setting conditions for each
operation.
4. Disk storage space setting: For deciding the disk space usage.
A : 50% for driving, 25% for parking, 25% for events (default)
B : 25% for driving, 50% for parking, 25% for events
C : 75% for driving, 25% for events
5. Video Quality: For setting the quality of the front, rear, left and right channel.
There are 3 stages: normal, high, very high
6. Framelate: For setting the framelate of the front, rear, left and right channel.
There are 7 stages: 1/5/10/15/20/25/30.
7. Resolution: For setting the resolution of the front, rear, left and right channel.
There are 2 stages: 360x240, 720x480.
8. Audio recording: For saving the audio of the front channel. It could be set an
audio On/Off.
28