Summary of Contents for Vision Eye Quattro
- Page 1 Quattro User Manual This system is for assisting people in driving safely. Users should use the product for its original purposes properly, considering that they will be responsible for all the accidents that might occur.
-
Page 2: Table Of Contents
Contents 0. Before using Quattro 16. Digital zooming 1. Overview 17. Playback of the recorded data 2. Precautions before using the product 18. Viewing of the information of the recorded file 3. Precautions when using the product 19. Quattro environment setting 4. -
Page 3: Before Using Quattro
The manual is made based on current conditions and may have technical and editorial errors and omissions. Some changes can be made in the product for the purpose of improving the performance of Quattro without notifying customers in advance. -
Page 4: Overview
Refrain from manipulating the Quattro while driving for the purpose of safe driving. This product is for assisting people in driving safely. -
Page 5: Precautions Before Using The Product
2. Precautions before using the product Scope of warranty and responsibilities - This product is for assisting people in driving safely. The company will not be responsible for the loss that could occur due to failures, data loss, or while using the product itself. - This product is an ancillary device designed for recording and storing external videos. -
Page 6: Precautions When Using The Product
. performance to be degraded. When the Quattro is used continuously and the memory usage level Take precautions when installing the external camera. exceeds a certain level, files will be deleted starting with the oldest ones in... -
Page 7: Features
4. Features (1) High-quality recording of videos through clear screen and optimal viewing angle In order to clearly record the videos including those taken at an accident site or taken while parked, the product provides not only clear resolution both for day and night, but also an optimal viewing angle. ... - Page 8 In the parking mode, if the voltage reaches a certain level as set for the cutoff voltage, the Quattro will be turned off to prevent itself from causing the battery to be discharged. There are four stages in the cutoff voltage as well as another four stages for the timer.
-
Page 9: Names Of Individual Components And Their Functions
5. Names of individual components and their functions WiFi Dongle SD card slot Power on/off LED for GPS (green) LED for the mode of monitoring while LED for the mode of monitoring while parked (blue) driving (red) Power cable socket External camera socket GPS socket Video output socket... -
Page 10: Functions And Buttons
6. Functions and buttons Buttons Operation Status LED indications Buzzer The yellow and led LEDs are turned on. They will be Switch on. System preparation Long beep turned off when the booting process ends. The file that is being currently recorded ends safely The yellow and red LEDs will stay turned on until they Switch off. -
Page 11: Updating
The current firmware version for the firmware updating can be checked through the Quattro update manager window. It is required to check whether the firmware update file location is the drive where the memory card is connected. - Page 12 7. Updating (2) [ Automatic updating ] After the power for the Quattro is turned off, the SD card needs to be inserted into the main body of the black box. Required to supply power to the black box. Required to wait for about 10-20 seconds.
- Page 13 PC viewer or through the main body of the Quattro before copying the update file (main_xxxxx_x.xx.xxxx_xxxxxx.bin). Required to insert the SD card into the main body of the Quattro after powering off the black box. Required to supply power to the black box.
-
Page 14: Components
After purchasing the product, it is required to check whether all the components are included in the package. If a component is damaged or has a problem, it is required to contact the selling shop immediately for queries. SD card Main body Front/Rear Video cable SD card for Quattro Left/Right Continuous reader stand cameras... -
Page 15: Socket Pin Arrangement
9. Socket pin arrangement Sockets Images of sockets Pin arrangement Power socket ① GND ② ACC ③ BAT (B+) (DC socket) ① VCC ② Rx (3.6-6 V DC) GPS socket ③ GND ④ Tx (2.5 pie) (GPS Signal Output) ① Video out ② No use Video out ③... -
Page 16: Precautions For Installation
10. Precautions for installation ▶ It is recommended to install the device in an area with a flat surface. The ignition must be turned off while installing. ▶ As the product needs to be built inside a car, it is required to supply the power and check first whether the front and rear videos are stored normally before completing the process of building and installing it. -
Page 17: Installation Of The Viewer
11. Installation of the viewer Set up the file for the specific viewer for the black box, which is stored in the SD card and then follow the procedure as shown below for viewer installation. -
Page 18: Execution And Deletion Of The Viewer
12. Execution and deletion of the viewer Select the icon on the wallpaper of the Windows or the start menu on the Windows, and check whether “Quattro” is installed as shown below. Execute “VisionEye Quattro ”. The viewer can be deleted by selecting “VisionEye Quattro ” on the start program. -
Page 19: Main Screen Of The Viewer
13. Main screen of the viewer Viewer/firmware version Quattro Screen Screen information and configuration Print capture full screen autoupdating List of files Front video Rear Creating button of Left Right playback list File opening Expansion and reduction of the graph... -
Page 20: Buttons Of The Viewer
Update This provides the version information of the specific viewer and the firmware of the Quattro and supports the direct link to the home page’s download center. The version information can be checked when the SD card is connected to a PC. -
Page 21: Full Screen View
14. Buttons of the viewer (2) Move to the previous/next frame For moving to a video taken in the unit of every 10 seconds before or after an incident. Start playback For starting to play the selected file back from the list. Play the temporarily recorded video back again Stop playback temporarily For temporarily stopping the file that is being played back currently. - Page 22 GPS module, an optional item, is installed. Quattro environment setting For storing the set environment of the Quattro in the SD card. The setting can be performed after the SD card is connected to a computer. Map on/off For displaying the driving location information on a map while a video is being played back.
- Page 23 15. Full screen view ◆ For viewing a video in full screen while playback, please double-click the screen. 1. Full screen mode: Double click the specific channel will shift the specific camera video to a full screen video. 2. Quad screen mode: Double click the screen will shift the four camera videos to a full screen video.
-
Page 24: Digital Zooming
16. Digital zooming ◆ Clicking the screen while a video is being played back will bring up a red-colored digital zooming box at the bottom left of the screen [Before digitally zoomed] [When digitally zoomed] 1. Shift the specific camera video to a full screen video. 2. -
Page 25: Playback Of The Recorded Data
Select the button on the viewer’s main screen. Then, as shown in the figure on the left, all the Quattro data included in the SD card will be searched before they are displayed through the playback list tab. -
Page 26: Viewing Of The Information Of The Recorded File
18. Viewing of the information of the recorded file ◈ In playback mode, it is possible to see the three-axis gravitational acceleration graphs as shown in the figure on the left. The three-axial directions include the front-rear direction, the left-right direction and the up- [Gravitational acceleration graphs] down direction. -
Page 27: Quattro Environment Setting
Quattro environment setting window as shown below. The window shows the tabs for VisionEye Quattro viewer setting/Environment setting/Time setting/Audio and video setting/Version information. It is required to connect the SD card to a computer before running this function. - Page 28 19. Quattro environment setting (2) 1. Parking mode motion sensitivity: For adjusting the sensitivity of the sensor that detects a motion (while parked). It is possible to choose among the four levels: high, medium, low, and no use. 2. Shock detection sensitivity: For adjusting the sensitivity of the sensor that detects shock.
- Page 29 It is possible to set the Quattro time and the standard time by selecting the time setting tab. Quattro time setting: If there is no GPS module in the product, it will be impossible to set the Quattro time. It is required to insert the SD...
-
Page 30: Checking And Recovery Of The Sd Card
Checking and recovery of the SD card: This process is for correcting errors that the SD card has or finding and recovering faulty sectors. If other applications are accessing the SD card, they should be ended before continuing this process. Take out the SD card that is inserted in the Quattro and connect it to a computer. Selecting the button on the viewer’s main screen will bring up the SD card... -
Page 31: Preparations For Using The Wifi Function
21. Preparations for using the WiFi function The WiFi function will be automatically turned on when the Quattro is booted up if the mini USB WiFi dongle is connected. 1. Connect the mini USB WiFi dongle to the main body. -
Page 32: Download And Installation Of Mobile Application
1. Execute “Play Store” icon from the smartphone. 2. Search “Quattro” through the search window. 3. Or take a picture of the QR code on the right to download the Quattro app. [For iPhones] 1. Support will be available later Precautions: - Downloading can take place only for smartphones based on the Android OS. -
Page 33: Naming Of Recording File
23. Naming of Recording File... -
Page 34: Storage Ratio Of The Memory Card Based On Space
24. Storage ratio of the memory card by memory [Table 1] Storage assignment for each recording mode by type and memory Unit: MB Type Memory (GB) Memory (MB) Continuous Parking Driving event 16384 7782 3891 3891 32768 15564 7782 7782 65536 31129 15564... -
Page 35: Standards Of The Product
25. Standards of the product Size: 105 x 107 x 22 mm (Main body) Memory: 32GB SDHC card class 10 exclusively ( Up to 128GB can be supported / MLC type SDHC card class 10 is recommended) Recording: Continuous recording, event recording and recording of monitored events while parked ... -
Page 36: Before Requesting A/S Services
26. Before requesting A/S services Users should back up (Separate saving) periodically important data saved in a product that provides storage function. It would be necessary to delete the data in the storage unit inevitably depending on cases. In relation to that, all the data stored in the storage device may be deleted while providing A/S services. -
Page 37: Problem Analysis Before A/S Services
When there is no GPS module, it is required to select the The time of the Quattro not correct. Quattro setting menu on the specific viewer in order to set the time through the time setting menu. Check the power on/off switch.