Table of Contents
Advertisement
7. Updating (1)
[ Automatic update]
1.
Through the specific viewer installed in a PC, the update file can be installed in the memory card automatically. After connecting
the SD card to the PC, it is required to push the
2.
The current firmware version for the firmware updating can be checked through the Quattro update manager window.
3.
It is required to check whether the firmware update file location is the drive where the memory card is connected.
4.
Pushing the
Caution:
If the Windows security warning message is displayed after the update button is pushed, the
pushed. If the
'Continuous Block'
Windows. Users need to pay attention to it.
1
will allow the upgrade file (main_xxxxx_x.xx.xxxx_xxxxxx.bin) to be copied into the memory card.
is pushed, it will be impossible to perform updating afterwards due to security issues related to
2
button on the top left side of the viewer' s main screen.
'Unblock'
button must be
3
11
Advertisement
Table of Contents
