Table of Contents
Advertisement
ASSEMBLING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material and labels before using the microwave
oven for the first time. Carefully unpack the
microwave oven and keep all the packing
material until all the parts of the microwave
oven have been found and the appliance has
been assembled.
To remove any dust that may have accumulated
during packing, wash the roller ring and glass
turntable tray in warm soapy water, rinse in
clean water then dry thoroughly. Wipe the
interior and exterior of the microwave oven with
a soft, damp cloth then dry thoroughly.
ASSEMBLING THE GLASS TURNTABLE
AND TURNING ON THE MICROWAVE
OVEN
1.
Place the roller ring into position in the
indented space in the oven cavity base.
2.
Insert the glass turntable into position,
matching the indents (hub) on the base
of the glass turntable with the indents in
the shaft located in the centre of the oven
cavity base.
3.
Plug the power cord into a 240V~ power
outlet. Switch on at the power outlet. The
microwave oven is now on.
10
INSTALLATION
1.
Select a level surface that provides
enough open space for the intake and/or
outlet vents.
2.
A minimum clearance of 20cm is required
between the oven and any adjacent walls.
•
Leave a minimum clearance of 30cm
above the oven.
•
Do not remove the legs from the bottom of
the oven.
3.
Blocking the intake and/or outlet openings
can damage the oven.
4.
Place the oven as far away from radios and
TV as possible. Operation of microwave
oven may interfere with your radio or
TV reception.
5.
Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency is the same as the voltage and
the frequency on the rating label.
30cm
20cm
20cm
Hide quick links:
Advertisement
Table of Contents
